XH-M350G

XH-M350G - On show

XH-M350G
High Volume Production Solution for Pure Copper and Copper Alloys

M350G, with a build volume of 350*350*500mm, boasts a robust modular design and can be equipped with one or two green fiber lasers, available in 500w, 700w, or 1000w. The system enables efficient printing of materials like copper, copper alloys, and precious metals, which are difficult or impossible to process with infrared lasers.
The machine's modular platform gives fexibility to reproducible production and easy maintenance. Its open-source system supports extensive parameter customization and a wide range of materials. The system is open to integrate seamlessly with upstream and downstream software.

Incredible Printing Performance with Cooper and Copper Alloys
Green laser enables the additive manufacturing of highly reflective materials, allowing for more effective and efficient printing. It delivers a high absorption rate, and generates less spatter during printing. Finer details can be achieved due to the small spot size of the green laser. The performance of the printed copper and its alloy parts are enhanced.

Electrical conductivity is approximately 101% IACS.
Thermal conductivity is approximately 390 W/(m·K)
Density is greater than or equal to 99.8%.
Min. wall thickness 0.08mm

Fast Printing Speed in Copper and Copper Alloys
15-55cm³/h(green laser) VS 6.12cm³/h(infrared laser)

Efficient Speed and Fine Details
Dual laser system, bidirectional powder coating, and equip with large layer thickness printing parameters, printing can be more efficient. Small spot size down to 40¿m, fine details can be realized.

Note: (1) Pure copper heat treated. The test parameter can vary according to factors like printing parameter, material used.
(2)Typical printing speed of single 1kW NIR laser
 

This product has been assigned by the exhibitor to category:
SYSTEMS AND MACHINES FOR ADDITIVE TECHNOLOGIES & 3D PRINTING / POWDER BED FUSION

This product is presented by the exhibitor: ADDIREEN TECHNOLOGIES